Aluminum Extrusions: New AD/CVD Investigations Deadlines & Scope

According to the initiation notices, released Oct. 30, the scope already has been revised twice prior to initiation, in response to administrability concerns related to the breadth of the scope as requested in the underlying petition (see 2310040064). Among other things, Commerce asked the petitioners -- the U.S. Aluminum Extruders Coalition and the United Steelworkers labor union -- to add affirmative language to the scope that clearly defines and describes the specific merchandise that is covered by the China petitions and not the existing orders" on aluminum extrusions in China.

In response, the petitioners added an "exhaustive list" of merchandise that would be covered by the new China orders, including certain heat sinks; "cleaning system components like mops and poles; banner stands/back walls; fabric wall systems; drapery rails; side mount valve controls; water heater anodes; solar panel mounting systems; 5050 alloy rails for showers and carpets; auto heating and cooling system components; assembled motor cases with stators; louver assemblies; event décor; window wall units and parts; trade booths; micro channel heat exchangers; telescoping poles, pole handles, and pole attachments; flagpoles; wind sign frames; foreline hose assembly; electronics enclosures; parts and subassemblies for storefronts, including portal sets; light poles"; and "air duct registers."

The list also includes: "outdoor sporting goods parts and subassemblies; glass refrigerator shelves; aluminum ramps; handicap ramp system parts and subassemblies; frames and parts for tents and clear span structures; parts and subassemblies for screen enclosures, patios, and sunrooms; parts and subassemblies for walkways and walkway covers; aluminum extrusions for LED lights; parts and subassemblies for screen, storm, and patio doors; pontoon boat parts and subassemblies, including rub rails, flooring, decking, transom structures, canopy systems, seating; boat hulls, framing, ladders, and transom structures; parts and subassemblies for docks, piers, boat lifts and mounting; recreational and boat trailer parts and subassemblies, including subframes, crossmembers, and gates; solar tracker assemblies with gears; garage door framing systems" and "door threshold and sill assemblies."

Also on the list are: "highway and bridge signs; bridge, street, and highway rails; scaffolding, including planks and struts; railing and support systems; parts and subassemblies for exercise equipment; weatherstripping; door bottom and sweeps; door seals; floor transitions and trims; parts and subassemblies for modular walls and office furniture; truck trailer parts and subassemblies; boat cover poles, outrigger poles, and rod holders; bleachers and benches; parts and subassemblies for elevators, lifts, and dumbwaiters; parts and subassemblies for mirror and framing systems; window treatments; parts and subassemblies for air foils and fans; bus and RV window frames; sliding door rails; dock ladders; parts and subassemblies for RV frames and trailers; awning, canopy, and sunshade structures and their parts and subassemblies; marine motor mounts; linear lighting housings; and cluster mailbox systems."

The International Trade Commission will conduct a concurrent investigation to determine whether imports of dumped and subsidized aluminum extrusions are injuring U.S. industry. If the ITC finds no injury in its preliminary injury determination, due Nov. 20, the investigations will immediately end. If Commerce finds dumping or illegal subsidization in the preliminary determinations of these investigations, due in December for CVD and March for AD, it will set AD and/or CVD cash deposit requirements for imports of merchandise subject to the investigation. If both Commerce and the ITC reach affirmative final determinations, Commerce will issue an AD and/or CVD order making duties permanent and beginning a process of annual administrative reviews to set final assessments of AD/CVD on importers and potentially change AD/CVD cash deposit rates.

The CVD investigation covers entries for the calendar year 2022. The AD investigations on China and Vietnam cover entries April 1, 2023, through Sept. 30, 2023, and the AD investigations on the other 13 countries cover entries Oct. 1, 2022, through Sept. 30, 2023.

Commerce said it will pick respondents to most of the new AD/CVD investigations based on responses to quantity and value questionnaires it will send to potential respondents, and will base respondent selection on the responses it receives. Exporters that don't get a quantity and value questionnaire can submit one using the forms provided by Commerce on its website. Responses are due Nov. 7.

For the AD investigations on Colombia and the Dominican Republic, the petitioners identified one Colombian company and two Dominican companies as producers or exporters of aluminum extrusions. "Therefore, unless we receive voluntary responses to the Q&V questionnaire from companies not identified, as described below, we intend to examine the one producer/exporter of aluminum extrusions from Colombia and the two producers/exporters of aluminum extrusions from the Dominican Republic," Commerce said.

Scope of the AD/CVD Investigations

“The merchandise subject to these investigations are aluminum extrusions, regardless of form, finishing, or fabrication, whether assembled with other parts or unassembled, whether coated, painted, anodized, or thermally improved. Aluminum extrusions are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by the Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, subject aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 1 contain not less than 99 percent aluminum by weight. Subject aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 3 contain manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. Subject aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contain magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by weight. The scope also includes merchandise made from an aluminum alloy with an Aluminum Association series designation commencing with the number 5 (or proprietary equivalents or other certifying body equivalents) that have a magnesium content accounting for up to but not more than 2.0 percent of total materials by weight.

“The country of origin of the aluminum extrusion is determined by where the metal is extruded (i.e., pressed through a die).

“Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (drawn aluminum) are also included in the scope.

“Subject aluminum extrusions are produced and imported with a variety of coatings and surface treatments, and types of fabrication. The types of coatings and treatments applied to aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including brightdip), liquid painted, electroplated, chromate converted, powder coated, sublimated, wrapped, and/or bead blasted. Subject aluminum extrusions may also be fabricated, i.e., prepared for assembly, or thermally improved. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, stretch-formed, hydroformed, knurled, swedged, mitered, chamfered, threaded, and spun. Performing such operations in third countries does not otherwise remove the merchandise from the scope of the investigations.

“The types of products that meet the definition of subject merchandise include but are not limited to, vehicle roof rails and sun/moon roof framing, solar panel racking rails and framing, tradeshow display fixtures and framing, parts for tents or clear span structures, fence posts, drapery rails or rods, electrical conduits, door thresholds, flooring trim, electric vehicle battery trays, heat sinks, signage or advertising poles, picture frames, telescoping poles, or cleaning system components.

“Aluminum extrusions may be heat sinks, which are fabricated aluminum extrusions that dissipate heat away from a heat source and may serve other functions, such as structural functions. Heat sinks come in a variety of sizes and shapes, including but not limited to a flat electronic heat sink, which is a solid aluminum extrusion with at least one flat side used to mount electronic or mechanical devices; a heat sink that is a housing for electronic controls or motors; lighting heat sinks, which dissipate heat away from LED devices; and process and exchange heat sinks, which are tube extrusions with fins or plates used to hold radiator tubing. Heat sinks are included in the scope, regardless of whether the design and production of the heat sinks are organized around meeting specified thermal performance requirements and regardless of whether they have been tested to comply with such requirements. For purposes of these investigations on aluminum extrusions from the People’s Republic of China, only heat sinks designed and produced around meeting specified thermal performance requirements and tested to comply with such requirements are included in the scope.

“Merchandise that is comprised solely of aluminum extrusions or aluminum extrusions and fasteners, whether assembled at the time of importation or unassembled, is covered by the scope in its entirety.

“The scope also covers aluminum extrusions that are imported with non-extruded aluminum components beyond fasteners, whether assembled at the time of importation or unassembled, that are a part or subassembly of a larger product or system. Only the aluminum extrusion portion of the merchandise described in this paragraph, whether assembled or unassembled, is subject to duties. Examples of merchandise that is a part or subassembly of a larger product or system include, but are not limited to, window parts or subassemblies; door unit parts or subassemblies; shower and bath system parts or subassemblies; solar panel mounting systems; fenestration system parts or subassemblies, such as curtain wall and window wall units and parts or subassemblies of storefronts; furniture parts or subassemblies; appliance parts or subassemblies, such as fin evaporator coils and systems for refrigerators; railing or deck system parts or subassemblies; fence system parts or subassemblies; motor vehicle parts or subassemblies, such as bumpers for motor vehicles; trailer parts or subassemblies, such as side walls, flooring, and roofings; electric vehicle charging station parts or subassemblies; or signage or advertising system parts or subassemblies. Parts or subassemblies described by this paragraph that are subject to duties in their entirety pursuant to existing antidumping and countervailing duty orders are excluded from the scope of these investigations, so long as they remain subject to the scope of such orders. Any part or subassembly that otherwise meets the requirements of this scope and that is not covered by other antidumping and/or countervailing duty orders remains subject to the scope of these investigations.

“The scope excludes assembled merchandise containing non-extruded aluminum components beyond fasteners that is not a part or subassembly of a larger product or system and that is used as imported, without undergoing after importation any processing, fabrication, finishing, or assembly or the addition of parts or material, regardless of whether the additional parts or material are interchangeable.

“The scope also excludes merchandise containing non-extruded aluminum components beyond fasteners that is not a part or subassembly of a larger product or system that enters unassembled as a packaged combination of parts to be assembled as is for its intended use, without undergoing after importation any processing, fabrication, or finishing or the addition of parts or material, regardless of whether the additional parts or material are interchangeable. To be excluded under this paragraph, the merchandise must be sold and enter as a discrete kit on one Customs entry form.

“Examples of such excluded assembled and unassembled merchandise include windows with glass, door units with door panel and glass, motor vehicles, trailers, furniture, and appliances.

“The scope also includes aluminum extrusions that have been further processed in a third country, including, but not limited to, the finishing and fabrication processes described above, assembly, whether with other aluminum extrusion components or with non-aluminum extrusion components, or any other processing that would not otherwise remove the merchandise from the scope if performed in the country of manufacture of the in-scope product. Third-country processing; finishing; and/or fabrication, including those processes described in the scope, does not alter the country of origin of the subject aluminum extrusions.

“The following aluminum extrusion products are excluded: aluminum extrusions made from an aluminum alloy with an Aluminum Association series designations commencing with the number 2 (or proprietary equivalents or other certifying body equivalents) and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 5 (or proprietary equivalents or other certifying body equivalents) and containing in excess of 2.0 percent magnesium by weight; and aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 7 (or proprietary equivalents or other certifying body equivalents) and containing in excess of 2.0 percent zinc by weight.

“The scope also excludes aluminum alloy sheet or plates produced by means other than the extrusion process, such as aluminum products produced by a method of continuous casting or rolling. Cast aluminum products are also excluded. The scope also excludes unwrought aluminum in any form.

“The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association (not including proprietary equivalents or other certifying body equivalents) where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) length of 37 millimeters (mm) or 62 mm; (2) outer diameter of 11.0 mm or 12.7 mm; and (3) wall thickness not exceeding 0.13 mm.

“Also excluded from the scope of these investigations is certain rectangular wire, imported in bulk rolls or precut strips and produced from continuously cast rolled aluminum wire rod, which is subsequently extruded to dimension to form rectangular wire with or without rounded edges. The product is made from aluminum alloy grade 1070 or 1370 (not including proprietary equivalents or other certifying body equivalents), with no recycled metal content allowed. The dimensions of the wire are 2.95 mm to 6.05 mm in width, and 0.65 mm to 1.25 mm in thickness. Imports of rectangular wire are provided for under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7605.19.0000, 7604.10.5000, or 7616.99.5190.

“Also excluded from the scope of these antidumping and countervailing duty investigations on aluminum extrusions from the People’s Republic of China are all products covered by the scope of the antidumping and countervailing duty orders on Aluminum Extrusions from the People’s Republic of China. See Aluminum Extrusions from the People’s Republic of China: Antidumping Duty Order, 76 FR 30,650 (May 26, 2011); and Aluminum Extrusions from the People’s Republic of China: Countervailing Duty Order, 76 FR 30,653 (May 26, 2011) (collectively, Aluminum Extrusions from the People’s Republic of China). Solely for these investigations on aluminum extrusions from the People’s Republic of China, the following is an exhaustive list of products that meet the definition of subject merchandise. Merchandise that is not included in the following list that meets the definition of subject merchandise in the 2011 antidumping and countervailing duty orders on Aluminum Extrusions from the People’s Republic of China remains subject to the earlier orders. No other section of this scope language that provides examples of subject merchandise is exhaustive.

[See above for the list of products included in the scope of the new investigations on aluminum extrusions from China.]

“Imports of the subject merchandise are primarily provided for under the following categories of the HTSUS: 7604.10.1000; 7604.10.3000; 7604.10.5000; 7604.21.0010; 7604.21.0090; 7604.29.1010; 7604.29.1090; 7604.29.3060; 7604.29.3090; 7604.29.5050; 7604.29.5090; 7608.10.0030; 7608.10.0090; 7608.20.0030; 7608.20.0090; 7609.00.0000; 7610.10.0010; 7610.10.0020; 7610.10.0030; 7610.90.0040; and 7610.90.0080.

“Imports of the subject merchandise, including subject merchandise entered as parts of other products, may also be classifiable under the following additional HTSUS categories, as well as other HTSUS categories: 6603.90.8100; 7606.12.3091; 7606.12.3096; 7615.10.2015; 7615.10.2025; 7615.10.3015; 7615.10.3025; 7615.10.5020; 7615.10.5040; 7615.10.7125; 7615.10.7130; 7615.10.7155; 7615.10.7180; 7615.10.9100; 7615.20.0000; 7616.10.9090; 7616.99.1000; 7616.99.5130; 7616.99.5140; 7616.99.5190; 8302.10.3000; 8302.10.6030; 8302.10.6060; 8302.10.6090; 8302.20.0000; 8302.30.3010; 8302.30.3060; 8302.41.3000; 8302.41.6015; 8302.41.6045; 8302.41.6050; 8302.41.6080; 8302.42.3010; 8302.42.3015; 8302.42.3065; 8302.49.6035; 8302.49.6045; 8302.49.6055; 8302.49.6085; 8302.50.0000; 8302.60.3000; 8302.60.9000; 8305.10.0050; 8306.30.0000; 8414.59.6590; 8415.90.8045; 8418.99.8005; 8418.99.8050; 8418.99.8060; 8419.50.5000; 8419.90.1000; 8422.90.0640; 8424.90.9080; 8473.30.2000; 8473.30.5100; 8479.89.9599; 8479.90.8500; 8479.90.9596; 8481.90.9060; 8481.90.9085; 8486.90.0000; 8487.90.0080; 8503.00.9520; 8508.70.0000; 8513.90.2000; 8515.90.2000; 8516.90.5000; 8516.90.8050; 8517.71.0000; 8517.79.0000; 8529.90.7300; 8529.90.9760; 8536.90.8585; 8538.10.0000; 8541.90.0000; 8543.90.8885; 8547.90.0020; 8547.90.0030; 8708.10.3050; 8708.29.5160; 8708.80.6590; 8708.99.6890; 8807.30.0060; 9031.90.9195; 9401.99.9081; 9403.99.1040; 9403.99.9010; 9403.99.9015; 9403.99.9020; 9403.99.9040; 9403.99.9045; 9405.99.4020; 9506.11.4080; 9506.51.4000; 9506.51.6000; 9506.59.4040; 9506.70.2090; 9506.91.0010; 9506.91.0020; 9506.91.0030; 9506.99.0510; 9506.99.0520; 9506.99.0530; 9506.99.1500; 9506.99.2000; 9506.99.2580; 9506.99.2800; 9506.99.5500; 9506.99.6080; 9507.30.2000; 9507.30.4000; 9507.30.6000; 9507.30.8000; 9507.90.6000; 9547.90.0040; and 9603.90.8050.

“While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope is dispositive.”

Investigations Timetable

These deadlines may be, and usually are, extended. The Commerce Department fact sheet on the initiation of these investigations is (here). See 2310040064 for a summary of the petition requesting these investigations.