Petition Seeks New AD Duties on Steel Shelving From 5 Countries

Any AD orders issued in connection with these investigations would follow an AD order issued in 2015 on boltless steel shelving from China. Edsal also filed that petition. The scope of the existing order is nearly identical to the proposed scope in the petitions.

Proposed Scope

The petition proposes the following scope for the investigations:

The scope of this investigation covers boltless steel shelving, with or without decks. The term "prepackaged for sale" means that, at a minimum, the steel vertical supports (i.e., uprights and posts) and steel horizontal supports (i.e., beams, braces) necessary to assemble a completed shelving unit (with or without decks) are packaged together for ultimate purchase by the end-user. The scope also includes add-on kits. Add-on kits include, but are not limited to, kits that allow the end-user to add an extension shelving unit onto an existing boltless steel shelving unit such that the extension and the original unit will share common frame elements (e.g., two posts). The term "boltless" refers to steel shelving in which the vertical and horizontal supports forming the frame are assembled primarily without the use of nuts and bolts, or screws. The vertical and horizontal support members for boltless steel shelving are assembled by methods such as, but not limited to, fitting a rivet, punched or cut tab, or other similar connector on one support into a hole, slot or similar receptacle on another support. The supports lock together to form the frame for the shelving unit, and provide the structural integrity of the shelving unit separate from the inclusion of any decking. The incidental use of nuts and bolts, or screws to add accessories, wall anchors, tiebars or shelf supports does not remove the product from scope. Boltless steel shelving units may also come packaged as partially assembled, such as when two upright supports are welded together with front-to-back supports, or are otherwise connected, to form an end unit for the frame. The boltless steel shelving covered by this investigation may be commonly described as rivet shelving, welded frame shelving, slot and tab shelving, and punched rivet (quasi-rivet) shelving as well as by other trade names. The term "deck" refers to the shelf that sits on or fits into the horizontal supports (beams or braces) to provide the horizontal storage surface of the shelving unit. The scope includes all boltless steel shelving meeting the description above, regardless of (1) vertical support or post type (including but not limited to open post, closed post and tubing); (2) horizontal support or beam/brace profile (including but not limited to Z- I-5 beam, C-beam, L-beam, step beam and cargo rack); (3) number of supports; (4) surface coating (including but not limited to paint, epoxy, powder coating, zinc and other metallic coating); (5) number of levels; (6) weight capacity; (7) shape (including but not limited to rectangular, square, and corner units); (8) decking material (including but not limited to wire decking, particle board, laminated board or no deck at all); or (9) the boltless method by which vertical and horizontal supports connect (including but not limited to keyhole and rivet, slot and tab, welded frame, punched rivet and clip).

Specifically excluded from the scope are:

• Wall-mounted shelving, defined as shelving that is hung on the wall and does not stand on, or transfer load to, the floor;
• Wire shelving units, which consist of shelves made from wire that incorporates both a wire deck and wire horizontal supports (taking the place of the horizontal beams and braces) into a single piece with tubular collars that slide over the posts and onto plastic sleeves snapped on the posts to create the finished shelving unit;
• Bulk-packed parts or components of boltless steel shelving units; and
• Made-to-order shelving systems.

Subject boltless steel shelving enters the United States through Harmonized Tariff Schedule of the United States ("HTSUS") statistical subheading 9403.20.0075. While the HTSUS subheading is provided for convenience and Customs purposes, the written description of the scope of this investigation is dispositive.

Commerce Accepting Comments on Petition Support

The Commerce Department is accepting comments on domestic industry support for the petitions to determine whether the petitions meet the dual requirements of support by domestic producers or workers accounting for (1) at least 25% of the total production of the domestic-like product and (2) more than 50% of the production of the domestic-like product produced by that portion of the industry expressing support for, or opposition to, the petition. If the petitions meet these requirements, among others, Commerce will initiate an antidumping duty investigation. Comments are due in about 20 days.